Derek Standard type fiber laser cutting machine 3015
2019-10-22

.Product introduction

The standard 3015 fiber laser cutting machine:

Laser cutting machine using fiber laser generator as light source.


The fiber laser used is a new type of fiber laser developed in the world, which outputs a high energy density laser beam and concentrates on the surface of the workpiece, so that the area on the workpiece which is irradiated by the ultra-fine focal spot melts and gasifies instantaneously. The automatic cutting is realized by moving the spot irradiation position through the numerical control mechanical system, with high speed and precision.

It can be used not only for plane cutting, but also for bevel cutting, and the edge is neat and smooth. It is suitable for high-precision cutting and processing of metal plates. Compared with ordinary CO2 laser cutting machine, it saves more space and gas consumption, and has high photoelectric conversion rate. It is a new product of energy conservation and environmental protection, and also one of the leading technical products in the world.

.Technical characteristics

  • 1.Raycus fiber laser
The electric-optical conversion efficiency of fiber laser is high, and the conversion efficiency is more than 30%. The low-power fiber laser does not need to be equipped with a water chiller. Using air cooling can greatly save the power consumption at work, save the operation cost, and achieve the highest production efficiency.

When the laser is running, it only needs electric energy, does not need to produce extra gas of laser, and has the lowest cost of operation and maintenance.

The fiber laser adopts the semiconductor modular and redundant design. There is no optical lens in the resonant cavity, and it does not need the start-up time. It has the advantages of no adjustment, no maintenance and high stability, and reduces the cost of accessories and maintenance time, which is incomparable to the traditional laser.

The output wavelength of the fiber laser is 1.064 μ m, which is 1 / 10 of the wavelength of CO2. The output beam has good quality and high power density, which is very conducive to the absorption of metal materials. It has excellent cutting and welding ability, so that the processing cost is the lowest.

  • 2.Whole machine smooth path

It is transmitted by optical fiber and does not need complex optical guiding system such as reflector. The optical path is simple, the structure is stable and the external optical path is maintenance free.

  • 3.Worthing Laser head
Protective lens: the cutting head contains protective lens, so that the consumption of expensive consumables such as focusing lens is very small;

Automatic adjustment: without manual focusing, the software can automatically adjust the focusing lens and control the height of the upper and lower parts, so as to realize the automatic perforation and cutting of plates with different thickness. The software can memorize the focal length of different plates, which is easier to operate, 10 times of the manual speed.

The adjustment range is large: + 10 ~ - 10, and the accuracy is 0.01mm, which is suitable for different types of plates of 0 ~ 20mm.

Long life: collimating lens focus lens double water cooling, reduce cutting head temperature, improve cutting head life;

Space: small size, light weight, movable working position, small floor area.

  • 4.Transmission and accuracy

The laser cutting machine adopts Japan Yaskawa motor, Taiwan Shangyin rack and Kefeng reducer. The positioning accuracy of the machine is 0.02mm, the cutting acceleration is 1.0g, and the working life is more than 10 years.

  • 5.Independent control cabinet

Dust proof design: all electrical components and lasers are built in independent control cabinet to improve the service life of electrical components;

Automatic constant temperature: the outside of the control cabinet is equipped with air conditioner, automatic constant temperature, to prevent the damage of components caused by too high temperature in summer.

  • 6.Stainless steel protection design

The operation area adopts stainless steel design to prevent cutting high temperature sparks from damaging the machine surface.

  • 7.Pad design display

Vertical screen display, different from traditional horizontal screen display, has fast response speed, high contrast, wide viewing angle, low power consumption, high resolution, higher brightness and lower reflectivity.

  • 8.Processing materials

Cutting of stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized plate, aluminum zinc plate, pickling plate, copper, silver, gold, titanium and other metal plates and pipes.

  • 9.Other features

Light is exported through optical fiber, which makes the design of mechanical system very simple and easy to integrate with robot or multi-dimensional workbench.

After the laser is equipped with a shutter, it can be used in one device and multiple machines. Through optical fiber splitting, it can be divided into multiple channels and multiple sets to work at the same time. It is easy to expand functions and upgrade conveniently and simply.

.technical parameter

  Machine model

 DRK 3015F

   Laser power

 1000W 2000W 3000W

 Laser source

 Imported IPG/Raycus

 Working area

 3000mmx1500mm

 Repeat positioning accuracy

 ±0.02mm

 Max. acceleration

 1G

 Maximum speed

 80m/min

 Specified voltage and frequency

 380V 50Hz/60Hz/60A

 Transmission mode

 Double drive rack drive

Laser wavelength

1064nm


.Samples